Products

SNEG-250 series. SubNanosecond Electrical Generator with built-in oscillator
Model	SNEG-250-20N	SNEG-250-20P
Amplitude (into 50 Ohm load)	-20V	+20V
Polarity	Negative	Positive
Pulse width (FWHM)	0.8 ns
Repetition frequency, external trigger	0 to 2 MHz
Repetition frequency, internal oscillator	0.01 to 2 MHz
Single-shot operation	yes
Pulse front duration (10%-90%)	250 ps
Pulse tail duration (10%-90%)	600 ps
Pulse front duration(20%-80%)	200 ps
Pulse tail duration (20% - 80%)	500 ps
Propagation delay (Ext trig in to pulse out) fixed	50 ns
Sync delay (Output pulse to sync out signal)	20 ns
Jitter, RMS, (Ext trig in to pulse out)	17 ps
DC offset or bias insertion	NO
Trigger required	TTL level
Sync output 2V (into 50 Ohm load)	20ns
Connectors	in, out and sync SMA D9-sub for DC and controls
Dimensions	43 x 66 x 107 mm (1.7 x 2.6 x 4.2 in.)
Power requirement	+15V, (200mA)
Pulse precursor	not exceeding 0.2V
Post-pulse ringing	abs. value not exceeding 1V
* A 50 Ohm load is required. Other loads may damage the instrument.
** Absolute maximum range for control voltages is from -10V to +10V.

New SNEG-250-100 Subnanosecond Electrical Generator with buil-in oscillator, mid-range voltage.
Model	SNEG-250-100N	SNEG-250-100P
Amplitude (into 50 Ohm load)	-90V	+90V
Polarity	Negative	Positive
Pulse width (FWHM)	1.2 ns
Repetition frequency, external trigger	0 to 1 MHz
Repetition frequency, internal oscillator	0.01 to 1 MHz
Single-shot operation	yes
Pulse front duration (10%-90%)	450 ps
Pulse tail duration (10%-90%)	600 ps

Coming soon DMPL-405-50 Directly Modulated (blue) Picosecond Diode Laser.
Wavelength	405 nm (other wavelengths are available on request)
Pulse front duration (10%-90%)	50 ps
Peak power	0.5 W
Repetition frequency	0 to 1.5 MHz
Single-shot operation	yes
Fibre optic output	optional